Using the unique design of removable and interchangeable heads to change colour, you simply lift the LED head out of the connector, turn the head 180° and reinsert into the loom. Designed to be fitted and wired during the decking build stage without the heads, the supplied rubber caps protect the fitting from the elements until the decking is complete. 

Suitable for indoor or outdoor use

Polished stainless steel & clear pc
Constructed from stainless steel (304) & polycarbonate
Super bright SMD LED technology
Innovative new fitting method
Improved lens designComplete with LED driver
10 x 0.75W LED module (SMD 4014) CCT (Included)
K: 3000/4000 Lm: 120 Lm/W: 16
IP67
Proj: 1mm Dia: 25mm
Class 3
Cut hole Dia: 20mm

Kit includes: 10 x 0.75W LED heads, 15W Driver, 5m Extension cable, 2 x 5 way looms & 3 Pin Plug
Fitting the Ikon Pro
Step 1 - Drill hole to the correct size
Step 2 - From below, push the wiring loom through the hole (without head)
Step 3 - Place weather protective cap onto the socket

Once the decking in complete
Step 4 - Place the LED heads onto the loom
Step 5 - Let the cap fall through the hole & firmly push the head into place. Repeat for all heads
Step 6 - Push the plug in and switch on to test

This listing is for a factory second. This could be an item with a minor cosmetic blemish or an ‘open box’ customer return. All seconds are safety checked and sold at exceptional clearance prices. Items listed as seconds are non-returnable or refundable